Its original design truly enhances your indoor or outdoor space. This spa, designed with a heavy-duty laminated PVC outer covering and beaded PVC interior liner, combines technology and sturdiness.
Available in two sizes – for 4 and 6 persons – the Montana has an external motor block for efficient filtering, effective massage and a rapid, powerful heating system.
Install your spa in less than 15 minutes. Refer to our video and enjoy your spa as quickly as possible.
130 massage jets aligned in a 360 degree arrangement, combined with a powerful 650W blower ensure that massage bubbles are comfortably and equally distributed throughout the hot tub. The motor unit also allows the water inside the tub to quickly heat up to 42°C so that you can enjoy the spa lifestyle all year round.
|Capacity||4 persons||6 persons|
|Internal dimensions||Ø 130 x H 70 cm||Ø 160 x H 70 cm|
|External dimensions||Ø 175 x H 70 cm||Ø 204 x H 70 cm|
|Volume of water||700 L||930 L|
|Weight (empty)||25 kg||30 kg|
|Exterior liner||Laminated PVC with leatherette finish|
|Interior Liner||Beaded PVC|
|Ground protection||Synthetic floor cover|
|Cover||0.6 mm laminated PVC with aluminium insulating sheet|
|Buckles||Safe closing system with special clip-on buckles|
|Control panel||Integrated digital control panel|
|Power supply||240V ~ 50Hz|
|Pump||Air and bubble pump||850 W|
|Bubble pump noise level||68 dB at 1 m|
|Filtration pump||40 W|
|Filtration noise level||55 dB at 1 m|
|Filtration flow||1200 L/h|
|PTC heating unit||Power output||2000 W|
|Water heating speed||1.5°C – 3°C/hour|
|Maximum temperature||42 °C|
|Dual insulated heating unit|
|Operating environment||5°C or above|